Controller v2

From 3D printer from scratch
Revision as of 20:38, 10 June 2018 by Sensille (talk | contribs) (Created page with "= UART-based Controller = Command Format Framing * 1 byte frame length * n byte frame data * 2 byte crc16 (CCITT) of frame data")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

UART-based Controller

Command Format

Framing

  • 1 byte frame length
  • n byte frame data
  • 2 byte crc16 (CCITT) of frame data