Controller

From 3D printer from scratch

Revision as of 20:50, 21 March 2018 by Sensille (talk | contribs) (Created page with "Currently an Artix-7 FPGA is used as the controller. It has a serial interface with a command width of 80 bytes.")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Currently an Artix-7 FPGA is used as the controller. It has a serial interface with a command width of 80 bytes.

Retrieved from "http://3dpfs.sensille.com/index.php?title=Controller&oldid=70"